功能

• This is a tap equipped with a 2 pin type insertion port of 5 units each on the top and side, for a total of 10 units.
• The insertion port is arranged in 2 sides to make it compact even though it has 10 units.
• By expanding the leg parts, the tap will not roll over easily even when a heavy AC adapter is connected.
• The leg parts are equipped with a 10 mm diameter hanging hole, a 5 mm diameter screw fixing hole, and an L-shaped Dharma hole on the bottom, which can be hung or fixed to a wall with the included tapping screws.
• To prevent the connected plug from interfering with the adjacent insertion port, the insertion port center is designed with a margin of 40 mm minimum. In addition, the end of each face is placed 57 mm apart, making it easy to use even with large AC adapters.
• It is equipped with a "dust prevention shutter" to prevent dust from entering when the plug is not inserted.
• The insertion port uses a thermosetting resin with excellent heat resistance, which is difficult to melt in the event of heat generation, and is effective in preventing electric fires.
• Equipped with an element (varistor) that absorbs lightning surges up to 12500 V caused by induced lightning, it protects connected equipment. (* The maximum surge voltage of 12500 V is based on the JEC210/212 standard.). The performance deteriorates depending on the voltage and the number of times received. )
• The 2-pin type plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
• Uses a 180° swing plug for easy wiring in tight spaces.
• The power cord uses a double tethered cord that conforms to the Japan Wiring System Manufacturers Association (JWDS0010), which is effective in preventing electric shock and fire caused by broken wires and tearing.
• Compact design with inlet ports on top and sides. Equipped with a rotating leg to prevent tipping over.