功能

• By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
• The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
• There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
• The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
• The reflective surface in contact with the nail coincides with the center of rotation of the holder.
• There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
• * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
• * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
• * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
• * In the case of a thick device, remove only one part of the resin nut completely and insert it.