产品详细内容
产品型号: 61-6982-55
产品品牌: SIGMAKOKI CO., LTD.
功能
- A dedicated controller for opto-microphone with encoder (SOM-C).
- This controller has interfaces RS232C, GP-IB, and USB, and can be driven manually by automatic control from a PC or by switching the jog switch.
- You can control complex behavior by sending simple commands from your PC through the interface.
- A double loop with speed control and deviation counter is adopted as the positioning system, so stable and high-precision operation is possible.
- * The USB interface only supports the company's software.
- * Opt microphones or other products without encoders of the Company may not be used in this controller.
- * Be aware that the connection will not operate properly and may cause malfunction.
规格
- [>Optmike控制器< 通用规格]
- 电源电压:AC100-120V/200-240V、50/60Hz20VA
- 操作温度:5 -40°C
- 环境湿度:20~85% RH (无冷凝)
- 储存温度:?摄氏20度-60度
- 外部尺寸: (W) 200 x (H) 52 x (D) 172公厘 (不包括凸出部)
- 质量:1.5公斤
- 控制轴数目:2个轴 (2BG) 、4个轴(4BG,但是在同一组中同时驱动最多两个轴)
- 座标设定范围:±32,767
- 传输速率:1.5-100μm/sec
- 传输速率设定:32个步骤
- 脉冲移动距离:1μm/脉冲
- 介面RS232C:连接器D-Sub9针母连接器英寸螺丝、波特率4800/9600/19200/38400、8位元资料长度、无同位检查、停止位元1位元、分隔符号CR+LF/CR/LFNo流量控制
- 介面GP-IB:设定位址1 -30、分隔符号CR+LF/CR/LF/EOI
- 介面USB:支援全速模式、分隔符号CR
- 驱动程式相容马达:DC无芯伺服马达
- 驱动程序超载检测 (过电流检测) :可用
- 驱动器编码器信号:A、B相,1μm/脉冲乘以2后在驱动器侧
- 驾驶限制传感器:+侧?边限(在主轴中绘制的方向为“?”)
- 驱动程式极性:通常关闭
- 指令名称/回复为机械原点:指令H:回复为机械原点
- 命令名称/逻辑原点设定:命令R:清除目前的位置座标
- 命令名称/速度设定:命令D:设定传输速率
- 命令名称/相对传输磁碟机:命令M:相对位置传输磁碟机
- 命令名称/绝对传输磁碟机:命令A:绝对位置传输磁碟机
- 命令名称/停止:命令L:停止optmike传输
- 命令名称/逻辑来源传回:命令N:返回逻辑来源
- 指令名称/控制指令:指令X:遗失动作设定
- 命令名称/设备状态确认:命令Q:check optmike coordinate
- 命令名称/控制器状态确认:命令?:检查控制器状态
- 【个别规格】
- 控制轴数目:2个轴
相关产品推荐
您可能还对以下产品感兴趣
61-0331-55 柠檬醛(顺式,反式异构体混合物)用于合成802489 5 mL 8.02489.0005
型号: 61-0331-55
品牌: Merck Millipore Corporation