产品详细内容
产品型号: 65-0576-23
产品品牌: TOKYO RIKAKIKAI CO., LTD.
功能
- Rapid and Economical Catalytic Reaction Screening Container for Reducing the Cost of Combichem Synthesis
- SynFlexTM Catalyst screening container for aluminum block thermostatic bath with stirrer. By using this container, atmospheric pressure and high-pressure reaction screening can be easily performed.
- Since high-throughput screening can be performed easily, the cost of equipment installation during large-scale research can be reduced.
- The container has a temperature sensor insertion hole for monitoring and controlling the temperature. Reflux of the cold finger prevents solvent loss.
- The vial can be set in the vessel hole in a short time to achieve a uniform temperature in the atmosphere.
- After manual gas replacement (vacuuming + inert gas filling) with a ball valve and a pressure gauge, reactant gases (such as hydrogen) can be filled.
规格
- 复合刻度:1.5~7.0 ml x 6
- 最大工作压力:5 MPa (230°C)
- 容器尺寸 (mm) :直径75 (圆柱部分)
- 工作温度范围:室温至230摄氏度 (使用隔膜时除外)
- 搅拌系统:磁力搅拌器 (RCH -1000型)
- 特性:
- 回流:冷指 (用自来水或冷却水回流)
- 气体置换:球阀 (三通切换) +压力表
- 压力指示和泄压阀:清除后的反应气填充-100/0/2400 kPa,泄压调整范围:0.34~2.41 MPa
- 标准:
- 其它:带有温度传感器插入孔,定位孔
- 容器尺寸 (mm) :高度110 (无突出物) ,体筒:phi 75 x 44 H
- 瓶容量:10毫升
- 尺寸 (mm) :phi 20 x 70 H, TS 14/23
- 搅拌器尺寸 (mm) :phi 5 x 15
- 连接直径:冷水连接港/清洗港:外径7.62 mm软管港,活性气体入口:外径1.58 mm (1/16") 软管,SUS 316制造
- 湿部材料:SUS 316 (主体,封面)、Viton (O形圈) 、EPDM (安全阀密封件) 、Glass (小瓶)
- *使用单支架BBS -1 HLD加热容器。
- *Perfro®制造的O形圈在200摄氏度以上需要更换。
- *当循环冷却水低于0摄氏度时,必须更换乙丙橡胶O形圈。
- *炒菜和炒菜是分开卖的。
- *根据样品和使用条件,这可能属于经济产业省的高压气体安全法。
- *低温回流需要冷却水循环器。
- *压力表和弹簧套件的转换要求在5MPa下工作。
- 代码:248370
相关产品推荐
您可能还对以下产品感兴趣
61-0324-22 [已停用]ICP多元素标准溶液USP-IIUSP > 232< 静脉注射剂量As, Cd, Cu, Hg, Mo, Ni, Pb, V Certipur (R) 505102 100mL 5.05102.0100
型号: 61-0324-22
品牌: Merck Millipore Corporation
62-8342-95 Millipore Express SHC墨盒过滤器10英寸。0.5/0.2μCode 7 EPDM;3/pk CHGE71TE3
型号: 62-8342-95
品牌: Sigma Aldrich Japan(Millipore)