功能

• Used for height and rotation coarse adjustment of holder with rod.
• Insert the rod in the holder and secure it with the clamp screws on the side of the body and the clamp screws on the middle ring at the top.
• Loosen the clamp screws on the side of the main body while the clamp screws on the middle ring are fixed to allow coarse adjustment of rotation around the vertical axis.
• Since there are three tap holes for the clamp screws on the side of the unit, you can move the clamp screws (However, RS-30 type comes with standard 3 clamp screws.) to the required position after setting the rod stand.
• There is an air vent hole, so it is easy to take the rod in and out.
• Intermediate ring (TRC) and clamp screw (RS-CB) are also available separately.